Available methods of importing or exporting DSTV or CIS/2 format file: • A file containing description of a steel structure model (a file that is compliant with the ISO-10303-21 standard) can be both imported and exported. For File path, specify the file location on disk (file location can also be specified after clicking Browse). This import/export mode results in generation of one file with *.stp extension including description of a structure model. Apostrophe Guide Pdf. • Files containing descriptions of steel structure parts to be applied when numeric commands are used (the files can only be exported). For Directory path, specify location of the folder in which files with description of structure parts will be saved (folder location can also be indicated after clicking Browse). In this mode (for each part of a steel structure that has been assigned a position), a separate file containing description of parts is created in the indicated folder.

Click Parameters in order to open the dialog. Edd Unemployment Office Chula Vista.

Opening The NC1 File Extension. Programs That Support NC1 Files. The file extension is usually three or more characters appearing in the file name after the dot. Oct 02, 2015 What is a DSTV file for those. It is a standard format used by some commercial steel detailing software. However i was looking to save parts to DSTV format.

Hello, At our office we have cnc equipment that apparently accepts only two types of file formats, NC1 & DSTV. I would like to know if any of the standard file formats that are normally associated with Inventor (like SAT, IGES, STEP, etc, etc.) can be considered to be an equivalent to either of these?

If so which one(s) and if not, does anyone know of a way or program that can convert 'standard' Inventor file formats into either of these more 'exotic' file types? Apparently X-steel can export to these file type, but we don't use X-steel. Ps yes we are a structural steel fabricator. Thanks for all of your replies. SAT format is probably closer to Inventor than any others.

However, the kernel used by Inventor is a derived version of Acis. Inventor supports SAT up to Acis 7.0.

Make sure save the file as SAT to Acis 7.0 or lower. Ibm Rational Rose 7 Enterprise on this page. Johnson Shiue Test Engineer Autodesk (email: johnsonDOTshiueATautodeskDOTcom) wrote in message news:5243579@discussion.autodesk.com. Hello, At our office we have cnc equipment that apparently accepts only two types of file formats, NC1 & DSTV. I would like to know if any of the standard file formats that are normally associated with Inventor (like SAT, IGES, STEP, etc, etc.) can be considered to be an equivalent to either of these? If so which one(s) and if not, does anyone know of a way or program that can convert 'standard' Inventor file formats into either of these more 'exotic' file types? Apparently X-steel can export to these file type, but we don't use X-steel. Ps yes we are a structural steel fabricator.

Thanks for all of your replies. CNC equipment (the controller on the CNC actually) reads code that tells the tool what direction to move. This code needs to be generated using a CNC programming tool (some of these like MasterCAM, EdgeCAM, etc) can get geometry directly from an Inventor file but it still needs to be post-processed to generate the code specific to the machine controller. Is this kind of what you are asking? Wrote in message news:5243579@discussion.autodesk.com. Hello, At our office we have cnc equipment that apparently accepts only two types of file formats, NC1 & DSTV.