Contents • • • • • • • • • • • • • • • • • • • • • Before you start Keep in mind that: You can always flash the MarsBoard, it never bricks (as the name:)) unless some hardware damage occurs. What you will need to flash the board is: • a MarsBoard RK3066 board • a PC running Windows (XP 32/64bit, Windows 7 32/64 bit) or Linux (32/64bit) • a micro USB cable with one side plugged in to the OTG port of MarsBoard and the other side plugged into the USB port on PC. The Poem In Patch Adams By Walt Whitman.
Android Flash File Tool, Firmware. Download All Android Tools And Firmware. Usb driver imei repair software and all type firmware free download on this. Firmware File is one of the best website which provide 100% free android stock firmware (flash file) for various brands. Intelligent Warrior Torrent.
Windows The Windows tool for flashing the image is provided by Rockchip. To flash the, you need to use the RKBatchTool and to flash the, you will need to use RKDevelopTool. Both RKBatchTool and RKDevelopTool rely on the RK USB driver so you will need to install it first as below: Install driver There two ways to install the driver under Windows: • install using RKDriverAssistant tools - the easy way • install manually If you have already installed the USB driver please skip this step. Install using RK Driver Assistant tools There’s no need to connect your Rockchip device during this procedure just download and extract Then double click on DriverInstall.exe in the RKDriverAssistant directory to start the utility. If you've previously tried to install the Rockchip USB drivers for any Rockchip devices make sure you click “Uninstall Driver” first. Then click “Install Driver”, and depending on your version of Windows the Security below may show up twice during installation.
Just click “Install” when the driver has finish installing then shut down MarsBoard and connect the MarsBoard to your computer and let the board go to, then your computer will detect the board and you will see it within device manager. Now the driver should have been installed successfully! Install Manually Download the file (Rockusb_Driver_v3.7.rar) from and shut down the MarsBoard then connect the MarsBoard to the computer and let the board go to. After your computer should detect the board and you will see an unknown device within device manager. Select the Unknown device then right click and select 'Update Driver Software'. Select 'Browse the computer for driver software'. Find the file unzipped file you downloaded earlier (Rockusb_Driver_v3.7.rar) and select either the 32/64bit folder then click 'OK' to install.
