28 CE77 PC Programming Software HARDWARE PARAMETERS Put a check mark into the check box to enable ad- justment of its parameter from the transceiver’s set (“menu”) mode. The available parameters are: 1.6 - 4 MHz RF Pow- er, 4 - 30 MHz RF Power, Dimmer Level-1, and Dim- mer Level-2. 1.6 - 4 MHz RF POWER This parameter programs the TX output power on the 1.6 - 4 MHz band for each power setting level.

To program the TX output power, double click the left mouse button on this column; enter de- sired TX output power from the keyboard, then press the [ENTER] key to accept the new TX out- put power. The available values are “10 (W)” to “125 (W)” for “High” power setting on the 1.6 - 4 MHz band, and “10 (W)” to “125 (W)” for “High” power set- ting on the 4 - 30 MHz band, “Medium” power setting, and “Low” power setting. 4 - 30 MHz RF POWER This parameter programs the TX output power on the 4 - 30 MHz band for each power setting level.

To program the TX output power, double click the left mouse button on this column, enter de- sired TX output power from the keyboard, then press the [ENTER] key to accept the new TX out- put power. Anwida Soft Geq31v Vst. The vailable values are “10 (W)” to “100 (W).” DIMMER LEVEL - 1 This parameter programs the Display Back-light Level and Back-light Options when “DIM” is not selected. The available Back-light Levels are “1” to “10,” and “OFF.” The available Back-light Options are “ON” (al- ways on) and “Key On 10S” (Back-light on for ten seconds after any key stroke).