• User's Manual Ethernet Interface Rev. 4.00 SRP-270 SRP-275 SRP-350 SRP-350plus SRP-370 / 372 SRP-770 / 770II SLP-T400 • Ethernet ■ Table of contents 1. Manual Information...3 2. Interface card and available printer..3 3. Specifications....4 3-1.

Hardware version...4 3-2. Configuration Tool...4 3-3. Virtual Driver...5 3-4. Hardware version and Configuration Tool..5 3-5. Details of interface card..5 4.

Free download bixolon ethernet configuration tool Files at Software Informer.

How to install...6 5. Odu Graduate Programs. • Ethernet 1. Manual Information The purpose of this manual is to provide information on the operation and usage instructions of the Ethernet Interface for the BIXOLON Printers. Interface card and available printer Printer Interface Card Hardware version Picture V4.x.x SRP-270 V3.x.x. • IFC-E TYPE [Note] - The DIP switch on the interface board should always be OFF.

Configuration Tool BIXOLON provides 2 types of network and serial communication set up utilities as a below; - Configure_V4.x.x.exe - Web Server - 4. • - It is available for Windows 2000, XP and 2003 server. Hardware version and Configuration Tool Hardware Configuration Tool Network Interface card Printer version file interface SRP-270,350 IFA-E SRP-370,372 SRP-350Plus Configure_V4.x V4.x.x Web Server IFC-E SRP-275 SRP-770II ON Board. • - Each version uses its own Configuration Tool. 2) Turn of the printer and insert the interface card. 3) Set the baud rate (Serial speed) - SRP-270,275: Max.

19200 bps - SRP-350: Max. 57600 bps - SRP-350Plus: Max.

115200 bps - SRP-370,372: Max. • Ethernet 5.

Static IP interface set up 5-1. Configuration Tool 1) Turn on the printer.

2) Execute Configure Tool. [Note] - Use proper Configuration Tool dependent on hardware version 3) Click Search. - 7 - V 4.00. • Ethernet 4) Select MAC Address in Board list and set up Network Setting. MAC Address [Note] - If many MAC addresses appear, refer to the MAC address on the label of the interface card. - Ask the Network administrator IP and its related information. - If you are not aware of Subnet Mask, refer to the below.

• Ethernet 5) Enter value at Local Port. [Note] - Default value is 9100. Best Income Generating Affiliate Programs. Choose from 6000 to 10000.

6) Set Inactivity Time as ‘0’. [Note] - Default value is 0. Choose from 0 to 65535. - When you set Inactivity time, Ethernet interface will disconnect by force after designated time. • Ethernet 7) Set baud rate (Speed) at Serial Setting [Note] - The baud rate (Speed) should be same as the baud rate of the printer. (Refer to [Appendix 1]) - Highest baud rate (Speed) can be used. 8) When setting finishes, click Setting.

[Note] Successfully finished set up Unsuccessfully finished set up. • Ethernet 9) Click Exit to finish set up. - 11 - V 4.00. • Ethernet 5-2. Web Server 1) Execute Internet Explorer. 2) Enter IP address of the printer at Address of Internet Explorer and click go. [Note] - If you are not aware of IP address, check IP address by pushing Function key.